Frigidaire Countertop Ice Maker Troubleshooting | 6 Easy Steps

If your Frigidaire ice maker isn’t producing ice, the fastest solution is often to reset it. Don’t worry, it’s not as complicated as it may sound. Here’s a complete troubleshooting guide for your Frigidaire countertop ice maker:

Why Is My Frigidaire Countertop Ice Maker Not Making Ice?

Your Frigidaire countertop ice maker might not be producing ice due to several potential reasons. Here are some possible explanations:

  1. Power Supply or Outlet Issue: If there’s an issue with the power supply or the outlet, your ice maker won’t function. Make sure the power cord is securely connected, and the outlet is working correctly without any defects.
  2. Low Water Reservoir: Ice makers need water to create ice cubes. If the water reservoir is empty, your Frigidaire ice maker won’t be able to make ice. Check and refill the water reservoir if it’s empty.
  3. Water Supply Line Blockage: Even if there’s enough water, a blockage in the water supply line or filters can hinder ice production. Mineral buildup or debris can clog the supply line and affect the pump’s operation.
  4. Frozen Water Supply Line: If the water supply line freezes, it can stop water from reaching the ice maker. To resolve this, unplug the ice maker and let it thaw in a warm room for a few hours.
  5. Full Ice Basket: Some ice makers have a sensor that detects when the ice bin is full. If the bin is full, the sensor will prevent the ice maker from making more ice. Empty the ice basket if it’s full to allow ice production to resume.
  6. Cleaning Mode Activated: Certain ice makers have a self-cleaning mode that halts ice production during cleaning. Always confirm the operational mode of your ice maker to determine if cleaning mode is the cause.

Step-By-Step Guide On How To Troubleshoot Your Ice Maker

In the hot summer, you rely on your countertop ice maker to be ready when you want ice. But what if you open it and there’s no ice?

While you could use ice trays and your freezer as a backup, it’s important to figure out why your ice maker isn’t working.

This guide will show you what to do and how to fix the issue.

frigidaire countertop ice maker troubleshooting

1. Inspect The Power Cord

Carefully examine the power cord for any visible signs of damage, such as frayed wires or cuts. Make sure the cord is securely plugged into the electrical outlet and the ice maker. If you notice any issues with the cord, replace it following the manufacturer’s instructions. Additionally, ensure that the cord is not tangled or pinched, as this can affect the power supply to the ice maker.

2. Check If The Outlet Has Power

To check if the electrical outlet is providing power, you can follow these steps:

  1. Plug in a different device, such as a lamp or phone charger, into the same outlet to see if it works. If the device works, the outlet has power.
  2. If the device doesn’t work, try resetting the circuit breaker for that outlet in your electrical panel. Locate the circuit breaker labeled for that outlet and switch it off, then back on. If it trips again immediately, there might be an electrical issue that requires professional attention.
  3. If the outlet still doesn’t provide power, you might need to consult an electrician to diagnose and fix the problem.

3. Check The Water Level

To ensure the proper functioning of your ice maker, it’s essential to monitor the water level. Here’s how you can check the water level:

  1. Open the water reservoir or access panel on your ice maker.
  2. Look inside to see if the water level is at the recommended point. This level is where you should fill the water reservoir to enable ice production.
  3. Fill the water to the indicated level, usually marked on the interior of the reservoir.
  4. Once you’ve filled the water to the appropriate level, close the reservoir or access panel securely.
  5. If the water sensor is dirty, clean it. Use a cotton swab soaked in white vinegar to gently clean the sensor’s surface.
  6. The water sensor should be clean and clear so it can give accurate readings. If the problem continues, try a thorough cleaning cycle with pure white vinegar.

If it still doesn’t work, you might need to replace the sensor.

4. Clean The Water Filters

Cleaning the water filters is essential to ensure your ice maker functions properly. Even if the water sensor isn’t the issue, your machine might still struggle to make ice due to a blocked water supply line. This is especially likely if you haven’t cleaned your machine in a while or if your water supply has a high mineral content.

To clean the filters:

  1. Begin by referring to your owner’s manual for instructions on how to remove the filters.
  2. Take out the filters and soak them in either lemon juice or white vinegar. This helps dissolve mineral deposits that can accumulate over time.
  3. Use a toothbrush to gently scrub the filters, removing any remaining debris.
  4. Rinse the filters thoroughly with water to ensure all traces of cleaning solution are gone.

Additionally, you need to inspect other water connections, pipes, and water lines. These areas can also become blocked, affecting your ice maker’s performance. Clean any blockages you find.

5. Check The Ice Storage Bin

When troubleshooting your ice maker, don’t forget to inspect the ice storage bin. If your ice maker isn’t making ice and you’ve ruled out power and water issues, here’s what you should do:

  1. Check for Fullness: Begin by looking inside the ice storage bin. If it’s packed with ice, the machine might have stopped to prevent ice from overflowing onto your kitchen counter.
  2. Prevent Spills: When the ice bin is too full, the machine can shut down to avoid any mess. To prevent this, take out some of the excess ice and store it in your freezer.
  3. Reset the Ice Maker: If the ice bin was overly full, resetting the ice maker could be the solution. You might need to reset it a few times to restart ice production.
  4. Sensor Obstruction: Ensure that the ice scoop or any other object is not blocking the sensor. Sometimes, if the scoop is bent upwards, it can trigger a false reading and make the machine think the compartment is already full. Adjust the position of the scoop if necessary.

6. Look For Leaks

Search for any signs of leaks in your ice maker. Examine both the interior and exterior of the machine for cracks or openings. Check underneath for water puddles or drips. If you detect any leaks, it’s essential to address them promptly.

A leaking ice maker not only affects its performance but can also lead to a lack of water available for ice production. Additionally, refrigerant leaks from the compressor coils can hinder ice-making functionality. If you find any cracks or leaks, it’s recommended to contact a technician for repair, as dealing with refrigerant can be hazardous. Technicians have the expertise to fix these issues and refill refrigerant safely, ensuring your ice maker works effectively again

‘Add Water Light’ Stays On Issue in Frigidaire Countertop Ice Makers Possible Solution

If you’re facing the problem of the ‘Add Water Light’ staying on in your Frigidaire Countertop Ice Maker, here are some steps you can take to troubleshoot and potentially resolve the issue:

  1. Check the Water Sensor: The ‘Add Water Light’ may stay on if the water sensor is malfunctioning or obstructed. Make sure there’s no debris or buildup affecting the sensor’s functionality. Cleaning the sensor with a soft cloth or cotton swab soaked in white vinegar might help.
  2. Inspect for Clogs: If there’s a blockage in the water supply line, it can prevent water from reaching the machine, triggering the ‘Add Water Light.’ Check for any clogs or obstructions in the water line or supply pump.
  3. Thaw Frozen Water Lines: Frozen water lines can also prevent water flow and trigger the ‘Add Water Light.’ If you suspect frozen lines, unplug the ice maker and let it thaw in a warm room for a few hours.
  4. Consult User Manual: If none of the above steps resolve the issue, refer to the user manual for specific troubleshooting guidance. Frigidaire customer support can also provide assistance.

Blinking Power Light on Your Frigidaire Countertop Ice Maker Troubleshooting

Troubleshooting the Blinking Power Light on Your Frigidaire Countertop Ice Maker

If you’re dealing with a blinking power light on your Frigidaire Countertop Ice Maker, here are some steps you can take to troubleshoot the issue:

  1. Check the Power Supply: Make sure the power cord is securely plugged into both the ice maker and the electrical outlet. If there’s any damage to the cord, replace it following the manufacturer’s instructions.
  2. Ensure Water Reservoir is Filled: Some ice makers won’t operate if the water reservoir is empty. Confirm that the water level is sufficient to initiate the ice-making process.
  3. Clear Blockages: Debris or mineral buildup in the water supply line can block the supply pump, causing the power light to blink. Inspect the water supply components and clean them if necessary.
  4. Check Ice Basket Full Sensor: If the ice basket is full, the sensor might turn off the ice maker, resulting in a blinking power light. Empty the ice basket and check if that resolves the issue.
  5. Check for Cleaning Mode: Some self-cleaning ice makers stop producing ice when in cleaning mode. Make sure your ice maker isn’t in a cleaning cycle.

If these steps don’t resolve the blinking power light issue, consult the user manual for further troubleshooting guidance or consider contacting Frigidaire customer support for assistance.

How Do You Reset A Frigidaire Ice Maker?

If you need to reset your Frigidaire ice maker, you can follow these steps:

  1. Unplug the Machine: Start by unplugging the ice maker from the power source. This ensures safety during the reset process.
  2. Empty Water Reservoir: If there’s any water in the water reservoir, empty it out. This prepares the ice maker for a fresh start.
  3. Clear Ice Basket: Open the ice maker’s lid and remove any ice cubes from the ice basket. This allows for proper functioning during the reset.
  4. Clean Metal Tubes: Use a soft, clean cloth to wipe the metal tubes inside the ice maker. This ensures there’s no residual moisture or debris that could interfere with the reset.
  5. Close Lid: Close the lid of the ice maker securely.
  6. Plug In and Turn On: Plug the ice maker back into the power source. Turn the machine on using the power button.
  7. Hold Power Button: Press and hold the power button for approximately 10 to 12 seconds. In the absence of a dedicated reset button, holding down the power button functions as a reset.
  8. Wait and Test: Allow the ice maker to rest for about 2 to 3 hours after the reset. This gives the machine time to recalibrate. After the waiting period, turn the ice maker back on and observe if it starts making ice.

By following these steps, you can successfully reset your Frigidaire ice maker. If the issue persists or if you encounter any difficulties, referring to the user manual or contacting Frigidaire customer support may provide further assistance.

How To Find The Water Sensor And The Filter On a Frigidaire Ice Maker?

Finding the water sensor and filter in your Frigidaire Ice Maker is essential for troubleshooting and maintenance. Here’s how you can locate them:

Water Sensor Location: The water sensor in your Frigidaire Ice Maker plays a crucial role in ensuring proper water levels for ice production. To find it:

  1. Open the Ice Maker: Open the lid or access panel of your ice maker to access the interior components.
  2. Look for a Small Disc: The water sensor is usually a small, dark-colored disc located in the lower part of the ice maker. It’s responsible for detecting the presence of water to initiate the ice-making process.
  3. Observe the Placement: The water sensor should be positioned near the area where the ice forms. It might be attached to a bracket or mount.

Water Filter Location: The water filter in your Frigidaire Ice Maker helps ensure clean and pure ice by removing impurities from the water. To locate it:

  1. Consult the User Manual: Refer to your ice maker’s user manual. It often contains information about the filter’s location and how to access it.
  2. Check the Top Right Corner: In many Frigidaire Ice Maker models, the water filter is located in the top right corner of the interior compartment.
  3. Look for a Cartridge: The water filter is typically a cartridge-style component that can be detached and replaced. It may have a handle for easy removal.

How To Maintain Your Ice Maker?

Proper maintenance can extend the lifespan and efficiency of your ice maker. Here are some essential steps to keep it running smoothly:

  1. Change Water Filters Regularly: Water filters ensure clean and pure ice. Replace them every six months or as recommended by the manufacturer. Clean filters help maintain ice quality and prevent clogs.
  2. Keep Away From Heat Sources: Place your ice maker away from heat-generating appliances like stoves and ovens. Direct heat can affect its performance and lifespan. Also, avoid placing it in direct sunlight.
  3. Inspect Water Supply Lines: Regularly check for cracks, tears, or leaks in the water supply lines. Damaged lines can lead to water wastage and reduced ice production. Replace worn-out lines promptly.
  4. Regular Cleaning: Clean the interior of the ice maker regularly to prevent mineral buildup and mold growth. Follow the manufacturer’s instructions for cleaning, and use mild cleaners or vinegar for effective results.
  5. Clean the Ice Bin: Empty and clean the ice storage bin periodically to prevent odors and ensure hygienic ice storage.
  6. Check for Blockages: Inspect the water supply line, pump, and valves for any obstructions that could hinder water flow. Clear any debris or clogs to maintain consistent ice production.
  7. Monitor Ice Level: Don’t allow the ice bin to become overfilled. Remove excess ice and store it in the freezer to avoid jams and sensor malfunctions.
  8. Regularly Reset: If you experience issues with ice production, consider resetting the ice maker according to the manufacturer’s instructions. This can resolve minor glitches.
  9. Use Soft Water: If possible, connect your ice maker to a water supply with soft water. Soft water reduces mineral buildup and extends the time between cleanings.
  10. Professional Maintenance: Schedule professional maintenance annually or as recommended by the manufacturer. A technician can inspect the internal components, perform thorough cleaning, and address any potential problems.
  11. Follow Manufacturer’s Guidelines: Always refer to the user manual for specific maintenance instructions and guidelines tailored to your ice maker model.


In conclusion, the Frigidaire countertop ice maker serves as a valuable tool for providing chilled beverages. However, when problems arise, it’s crucial to know how to troubleshoot and resolve issues to keep the ice flowing. By understanding the causes behind power, water, and sensor-related problems, you can effectively restore your ice maker’s functionality.

Furthermore, maintaining your ice maker through regular cleaning, monitoring the ice storage bin, and being aware of sensor blockages contributes to its longevity and consistent performance. This comprehensive guide empowers you to not only troubleshoot and fix issues but also maximize the lifespan of your ice maker, ensuring a continuous supply of cold refreshments.

Related Post’s

How to hisense ice maker troubleshooting?

How To Keep the Ice Maker Clean?


Scroll to Top